English
214
Remote Control
(RUE-4165 supplied with CVA-1005)
1
Opening the battery cover.
Push on the cover and slide it as indicated by
the arrow then the cover will be removed.
Replacing the battery.
Remove the old batteries. Insert new ones
matching the (+) and (–) polarities as shown in
the diagram inside the remote control.
2
−
+
+
−
Closing the cover.
Push the cover in the arrow direction until a
click is heard.
3
Replacing battery
Applicable battery: Use two "AA" sized dry
batteries.
• Point the remote control transmitter toward
the remote sensor on the CVA-1005 and use
the remote control within 2 meters from the
CVA-1005.
Remote Sensor
To Next Page
Loading...
