malletKAT User Manual (ver.07-17-18)
67 Soft Pedal (on/off)
68 Legato Pedal (on/off)
69 Hold 2 Pedal (on/off)
70 Sound Variation
71 Resonance (aka Timbre)
72 Sound Release Time
73 Sound Attack Time
74 Frequency Cutoff (aka Brightness )
75 Sound Control 6
76 Sound Control 7
77 Sound Control 8
78 Sound Control 9
79 Sound Control 10
80 Decay or General Purpose Button 1 (on/off) Roland Tone level 1
81 Hi Pass Filter Frequency or General Purpose Button 2 (on/off) Roland Tone level 2
82 General Purpose Button 3 (on/off) Roland Tone level 3
83 General Purpose Button 4 (on/off) Roland Tone level 4
91 Reverb Level
92 Tremolo Level
93 Chorus Level
94 Celeste Level or Detune
95 Phaser Level
It’s probably best not to use the group below for assigning controllers.
96 Data Button increment
97 Data Button decrement
98 Non-registered Parameter (LSB)
99 Non-registered Parameter (MSB)
100 Registered Parameter (LSB)
101 Registered Parameter (MSB)
It’s very important that you do not use these no matter what unless you want to invoke these functions
120 All Sound Off (this is the ALL NOTES OFF keyboard shortcut)
121 All Controllers Off
122 Local Keyboard (on/off)You might actually crash your keyboard if you use this one.
123 All Notes Off
You typically don’t want your synths to change modes on you in the middle of making a song, so don’t
use these.
124 Omni Mode Off
125 Omni Mode On
126 Mono Operation
127 Poly Operation
Powered by TCPDF (www.tcpdf.org)
109 / 109
To Previous Page
Loading...
