Alternate Mode malletKAT - Setting Up The Controllers

malletKAT User Manual (ver.07-17-18)
6.1. Setting Up The Controllers
Each of the 128 User Setups in the malletKAT is fully a customizable “KIT” used as a
MIDI Controller to send data to a Sound Source or Synthesizer.
To review the “basics” of how this works, please refer to the malletKAT
Essentials(https://alternatemode.com/online-docs/malletkat/#essential-information-to-understand-your-malletkat)
section.
The Most Important Thing:
Know Which Controller You Are Working On!
From the moment you press down the Edit footswitch, you will know which User Kit (User Setup) and
which Controller is being edited!
You can change to the other controller by tapping the Increment/Decrement pads from the screen above.
49 / 109