Commissioning
Amaco BAG0028.0 04.06
19
6.1 Entering machine code
To every implement a code number (e. g.
F.13
) has been determined
which yo u may take from the tables (below).
For the pack top seed drills equipped with star wheel
AD 2
and
AD-P 2
with 3 m working width the code number
”F.13”
refers.
When first switching on the calculator (see also on page 18) by press-
ing the
-key or the -key aut omatically the code
F.13
ap-
pears:
D8 SPECIAL Tyres 5.00-16
Number of crank turns at the wheel
Code
Working width
1/40 ha 1/10 ha
F. 1
2.5 m 49.5 197.0
F. 2
3.0 m 41.0 164.0
D8 SPECIAL
D8 SUPER
MD 8
Tyres 6.00-16
Number of crank turns at the wheel
Code
Working width
1/40 ha 1/10 ha
F. 3
2.5 m 46.0 185.0
F. 4
3.0 m 38.5 154.0
D8 SUPER
MD 8
Tyres 10.0/75-15
Number of crank turns at the wheel
Code
Working width
1/40 ha 1/10 ha
F. 5
3.0 m 37.0 149.0
F. 6
4.0 m 28.0 112.0
D8 SUPER,
MD 8
Tyres 31x15,50-15
Number of crank turns at the wheel
Code
Working width
1/40 ha 1/10 ha
F. 7
3.0 m 36.0 144.0
F. 8
4.0 m 27.0 108.0
F. 9
6.0 m 18.0 72.0
D8 SUPER Tyres 11.5/80-15
Number of crank turns at the wheel
Code
Working width
1/40 ha 1/10 ha
F. 10
4.5 m 22.0 88.0
F. 11
6.0 m 16.5 66.0
To Next Page
Loading...