Amazone AMACO - Use of the Machine; Starting to Operate

To Next Page

To Previous Page

Commissioning

Amaco BAG0028.0 04.06

6.1.1 Entering code

When confirming the

-key the actual code is shown i n the dis-

play . If yo u w ant to change this code:

1. Press

-key for 2 seconds.

Display: Code flicks.

2. Press

-key as follows unti l the correct code appears::

At every pressing of th e ha-key o n the display the next follo wing

code in uprising order appears.

If the ha-key is pressed and the key is kept pressed the codes

appear on the display in downward order.

3. Press

-key for 2 seconds, as soon as in the display the

desired code is shown. The code then has been entered (pro-

grammed).

If you

do not

press the

-key the displayed (flicking) code

will be programmed automatically after 10 seconds.