Amazone AmaDrill+ - Displaying the Scale Position of the Vario Gearbox Setting Lever; Interrupting the Sowing Process by Switching off the Metering Roller Drive

Work commencement
AMADRILL+ BAH0040-9 01.19
47
7.4.4 Displaying the scale position of the Vario gearbox setting lever
This display is only possible for seed drills with
Vario gearbox and electric seed rate remote
control.
Press
.
 Display (Fig. 41):
Momentary scale position (e.g. 37) of the
Vario gearbox setting lever.
Fig. 41
7.4.5 Interrupting the sowing process by switching off the metering roller drive
This setting is only possible for pneumatic seed
drills with full metering functionality.
Press
.
 Display (Fig. 42): "Stop".
The metering roller drive is disconnected.
The metering roller stops.
Press
.
 The metering roller drive is reactivated.
Fig. 42
CAUTION
Adjustment, maintenance and repair work on the metering unit
 only execute when the control terminal is switched off
 do not carry out after pressing the
button.
The metering roller can move suddenly and cause an injury.