Layout and function
20
AMADRILL+ BAH0040-9 01.19
4.6 Creation of tramlines
As described in the operating manual for the seed drill, the tramline control allows the creation of
tramlines at pre-selected intervals on the field.
When creating a tramline
the tramline counter shows the number "0" on the control terminal
the tramline coulters do not deposit any seeds in the soil.
the seed rate must be reduced by the quantity that is otherwise deposited by the tramline coulters
(see section "Table for seed rate reduction while creating tramlines", Seite 68)
the reduced seed rate is adjustable
(see section "Machine data table", Mode 7, Seite 56).
The seeding rate must not be reduced when creating the tramlines with
Seed drills D9
Seed drills AD
Seed drills AD-P 3000/3500/4000 Super/Special.
Seed drills D9 and AD:
For D9 and AD seed drills, the drive shafts of the tramline metering
wheels remain at a standstill when creating the tramlines.
AD-P 3000/3500/4000 Super/Special:
AD-P 3000/3500/4000 Super/Special pack top seed drills are
equipped with seed return flow. The seed of the tramline coulters is
routed back into the seed hopper when creating tramlines.
AD-P 3001/3501/4001:
AD-P 3001/3501/4001 Super/Special pack top seed drills are not
equipped with seed return flow. For these seed drills, the seeding rate
must be reduced.
To Next Page
Loading...
