General safety instructions
8
AMADRILL+ BAH0040-9 01.19
2 General safety instructions
This section contains important instructions for operating the control
terminal safely.
2.1 Obligations and liability
Comply with the instructions in the operating manual
Knowledge of the basic safety instructions and safety regulations is a
basic prerequisite for safe handling and fault-free operation of the
control terminal.
Guarantee and liability
Our "General conditions of sales and delivery" are always applicable.
These shall be available to the operator, at the latest on conclusion of
the contract.
Guarantee and liability claims for damage to people or property will be
excluded if they can be traced back to one or more of the following
causes:
Non-intended use of the control terminal
Improper installation, commissioning and operation of the control
terminal
Non-compliance with the instructions in the operating manual
regarding commissioning, operation and maintenance
Unauthorised structural changes of the control terminal.
2.2 Informal safety measures
As well as all the safety information in this operating manual, comply
with the general, national regulations pertaining to accident prevention
and environmental protection.
2.3 User workstation
The control terminal must only be operated by one person sitting in
the driver's seat of the tractor.
To Next Page
Loading...
Need help?
General
