Amazone AmaDrill+ - Calibration Test for Implements with Vario Gear Motor (as of model year 2015)

Settings
AMADRILL+ BAH0040-9 01.19
37
6.7.6 Calibration test for implements with vario gear motor (as of model year 2015)
Equipment:
 AmaDrill+
as of year of manufacture 2015
 Seed drill
with electric cylinder (Fig. 31/1).
Fig. 31
1. Prepare the seed drill for the calibration test as described in the seed drill operating manual (set
up calibration trough, etc.).
2. Press
.
3. Press the
button or button
 Enter the code number:
Mechanical seed drills Pneumatic seed drills
Metering wheel
Normal seed
metering
wheel
Fine seed
metering
wheel
Metering roller
Code number
3 1 See table Fig. 62, Seite 66
4. Press .
5. Press
.
6. Enter the desired spread rate (kg/ha).
7. Press
.