Amazone AmaDrill+ - Fault Display A7; Fault Display A8; Fault Display A9

Faults
AMADRILL+ BAH0040-9 01.19
51
8.5 Fault display A7
Data for one or more setpoints is missing (e.g.
target fan speed).
Fig. 49
8.6 Fault display A8
Pneum. seed drills with full metering:
Metering roller control defective.
Fig. 50
8.7 Fault display A9
Seed drills with Vario gearbox:
The actual position of the gear setting lever does
not correspond to the target position. The
gearbox setting lever does not point to the
required scale value.
Pneum. seed drills with full metering:
The required speed of the metering roller is not
reached.
Reduce the working speed.
Fig. 51