Amazone AmaDrill+ - Fault Display A10; Fault Display A11; Fault Display A12

Faults
52
AMADRILL+ BAH0040-9 01.19
8.8 Fault display A10
Pneum. seed drills with full metering:
The maintenance flap of the metering unit is
open.
Fig. 52
8.9 Fault display A11
Interruption during zero point travel (see section
"Calibration of the Vario gearbox", Seite 29).
Fig. 53
8.10 Fault display A12
Pneum. seed drills with full metering:
The target spread rate cannot be maintained.
Fig. 54