Faults
AMADRILL+ BAH0040-9 01.19
53
8.11 Fault display A13
Pneum. seed drills with full metering:
If the fan speed drops to a value below 200 rpm,
the electric motor that drives the metering roller
in the metering unit stops.
Fig. 55
Switching off the alarm message
1. Increase the blower fan speed to the required rpm.
2. Press
as soon as the blower fan speed is above 200 rpm.
The warning message is switched off.
The metering roller in the metering unit is turning with the required speed.
To Next Page
Loading...
