Commissioning
36 Amatron+ BAG0063.1 03.10
The scales must weigh accurately.
Inaccuracies may cause deviations in
the actual dispensed quantity.
19. Read off the theoretically dispensed
quantity of pellets from the job and compare
it with the weighed quantity.
20. If the calculated quantity for the job is
greater than the weighed quantity
increase the spread rate.
less than the weighed quantity
reduce the spread rate.
Calibrate slug pellets for right
outlet:
Calibrate the right side in the same way as for the left outlet.
Maintain a steady speed when spreading slug pellets (as entered in
the AMATRON
+
), because the electric setting motors do not ad-
just to allow for speed when spreading pellets.
The slug in the work menu indicated that Slug pellets is selected in
the Machine data menu.
To Next Page
