Ametek Land LANCOM 4 - Page 73

15 - 3
Lancom 4Portable Flue Gas Analyser
User Guide
Step Function See Insight
User Guide
Page
7 Select the User Table by clicking on the User Table tab.
8
Select Rename
from the Table menu, and name the table
SO2 Check.
28
9 Remove columns for gases that are not required by moving
to the column heading and pressing the right hand mouse
button, the column menu will appear.
10
Select Remove Column
from the menu.
28
11 Select Alarm Setpoint
from the Insert menu. 31
12 Complete the Setpoint dialog box as shown in the example.
13
Select Input Parameters from the Input menu.
27
14 Complete the Input Parameters dialog box as shown in the
example.
15
Select Edit Trigger
from the Input menu.
45