Ethernet Configuration and Remote Programming SG Series Programming
5-16 M550129-03 Rev L
5.5.1 HOME
This is the default, information-only page. It displays all of the current
information about the supply that you are connected to:
Figure 5-12. SGI Home Page
The Model number, the Manufacturer, and the Serial Number of
your Ethernet power supply
Firmware Revision: the version of the Ethernet firmware that is
currently installed.
VISA Resource identifies the specific resource name used to
communicate via VISA (Virtual Instrument Software Architecture)
LXI™ Compliance: the version and instrument class of the LXI™
standard with which your power supply is compliant
Host Name: either the default or user-defined, network-unique
identity (Must be limited to 15 characters or less for LXI
compliance).
Description: either the default or user-defined description of the
power supply in use (you can change the description to suit your
needs, in the CONFIGURATION page, but it must be limited to 36
characters)
MAC Address: the power supply Ethernet’s unique hardware
address
To Next Page
Loading...
