Ametek Thermox Series 2000 WDG-IVC User Manual

Calibration | 5-1
CALIBRATION
CALIBRATE KEY
Initiate Cal
Initiate Verify
Cal/Verify Data
Cal Gas Value
Inject Cal Gas
Set Cal Timers
Set K Factor
Sensitivity
Figure 5-1. Calibrate Key menu options.
Sensor alarms are disabled during calibrations and the recovery time
after a calibration. You can set whether analog outputs should follow
the calibration readings or hold at the last process reading before the
calibration.
NOTE


Ametek Thermox Series 2000 WDG-IVC Specifications

General

Brand	Ametek
Model	Thermox Series 2000 WDG-IVC
Category	Measuring Instruments
Language	English