xii | Thermox Series 2000 WDG-IV / IVC / IVCM
Declaration of Conformity
Manufacturer’s Name: AMETEK/Thermox
®
Manufacturer’s Address: Process & Analytical Instruments Division
150 Freeport Road
Pittsburgh, PA 15238
declares that the products:
Product Names: Thermox WDG series of Flue Gas Analyzers using Series 2000 Controller:
WDG-IV WDG-IVC WDG-IVCM
WDG-HPII WDG-HPIIC
O2 Only RCU
O2 & Comb RCU
O2, Combustibles & Methane RCU
Conform to the following standards:
EMC compliance:
EMC Directive 2004/108/EC
Immunity:
EN 50082-2:1995 Generic - Heavy Industrial Equipment
EN 50082-1:1997 Generic - Residential, Commercial, Light Industrial Equipment
EN 61000-6-2:1999 Generic - Heavy Industrial Equipment
EN 61326:1997 Measuring Equipment (Heavy Industrial)
Emissions:
EN 55011:1998 Class A, ISM Equipment
Safety Compliance:
UL 3101-1 UL Listed Inspection and Measuring Electrical Equipment
CAN/CSA 22.2 No. 1010.1-92 cUL Listed Inspection and Measuring Electrical Equipment
Low Voltage Directive 73/23/EEC:
EN61010-1:1993,
Amendment A2: 1995 Electrical Equipment for Measurement, Controls,
and Laboratory Use
Series 2000 Controller also has the following safety compliance:
UL 1604 UL Listed Process Control Equipment for Use in Hazardous Location
WDG Series analyzers with the suffix Div. 2, O2 Only RCU, O2 & Comb RCU, and O2,
Combustibles & Methane RCU also conform to the following safety standard:
UL 1604 UL Listed Process Control Equipment for Use in Hazardous Locations
Manufacturer’s Address in Europe:
AMETEK Precision Instruments Europe GmbH
Rudolf-Diesel-Strasse 16
D-40670 Meerbusch, Germany
Mark Coppler
Compliance Engineer
April 2002
To Next Page
Loading...
Need help?
General
