Ampac LoopSense User Manual

Page 13
LOOPSENSE EN54 USER MANUAL
4.8 Disabled Condition
When the user disables an input, output or zone the associated configured outputs will no longer
operate and will no longer effect panel conditions. The system registers a disabled condition as
follows:
 Common DISABLED LED will be illuminated
 Disabled condition to be reported to the LCD.
 The disable event will be logged and printed, where a printer is fitted.
 All outputs configured to operate under a disabled condition will operate
<point location> DISABLED
<point descriptor> <type>
<date> <time> CONTROL*
DISABLED XXX OF XXX ◄ZONE
4.9 Other Conditions
The two remaining conditions are:
System
 This event is not printed or displayed on the LCD
 The event will be logged
 All outputs configured to operate under this condition will operate
Transparent
 This event is not logged, printed or displayed on the LCD
 All outputs configured to operate under this condition will operate

Ampac LoopSense Specifications

General

Brand	Ampac
Model	LoopSense
Category	Control Panel
Language	English