Ampac LoopSense User Manual

Page 21
LOOPSENSE EN54 USER MANUAL
7.2 Menu > Control
Access Level 2 – to access this level the operator should use the “Controls Normal – Enable”
keyswitch or enter the Password.
CONTROL
ZONE
DEVICE
PANEL
GLOBAL CONTROL
NOTE:
1: At Access Level 1, the entire menu is not accessible.
2: At Access Level 2, individual sounder disablement,
SET-UP and PROGRAMMING menu items
are not accessible, user can access level 3 via the
correct password entry.
3: At access level 3, every option is available
1
2
3
4
2
ABC
2
ABC
3
DEF
1
4
GHI
Pressing
2
ABC
opens the “Control” menu from which the operator can select one of the “Control”
functions shown above by pressing
(up), (down), to move through the menu. To view its
control options on the LCD press the number associated with that facility on the alpha numeric key
pad or press
to go directly to it.
CONTROL MENU
1►ZONE 3|PANEL
2|DEVICE 4|GLOBAL CONTROL
7.2.1 Menu > Control > Zone
CONTROL
ZONE
1
DISABLE INPUTS
1 2 3 4
SILENT WALK TEST WALK TEST DISABLE SOUNDERS
NON
SOUNDER
DISABLE
SOUNDER
DISABLE
ON
ALERT
PRINT
EVAC PRINT
ALARM LED ON
DISABLE
1
2 3 4
SUB ADDR / REM I/O PRINT
1
2 3
1 2 3
4
2
ABC
1
DEVICE
Once in the “Control” menu press
1
to open the “Zone” menu. By following the screen prompts
select the type of control, 1 to 4. Once selected simply step through the menu again to implement.
Selecting the Zone Control menu prompts the user to select the zone number using the generic zone
point selection screen followed by the corresponding zone control menu:
Zzzz <status>
<zone descriptor>
1:DISABLE INPUTS 2:DISABLE SOUNDERS
3:SILENT WALK TEST 4:WALK TEST DEVICE►
Actions are all context sensitive
Disable inputs becomes enable inputs
Disable sounders becomes enable sounders
Walk test will start walk test and toggle to remove test
Silent walk test will start silent walk test and toggle to remove test
Pressing ► will display device (or input) within the zone; these are scrollable using ▲▼
Device screens:
Zzzz Ppp Lll Dddd.s <status>
<device descriptor>
◄BACK:DISABLE 2:SUB ADDR 3:PRINT
4:ALARM LED ON MORE ►

Ampac LoopSense Specifications

General

Brand	Ampac
Model	LoopSense
Category	Control Panel
Language	English