EN54-2 & 4 1997 including amendments 1 & 2
Control and Indicating equipment and Power Supply equipment for fire detection
and fire alarm systems for buildings
8281-0105 1 Loop 32 Zone analogue addressable control and
indicating equipment
8281-0205 1 Loop 32 Zone analogue addressable control and
indicating equipment
Provided options:
Output to fire alarm devices
Output to fire alarm routing equipment
Alarm confirmation input from fire alarm routing equipment
Delay to outputs
Dependencies on more than one alarm signal – Type A
Dependencies on more than one alarm signal – Type B
Dependencies on more than one alarm signal – Type C
Fault signal from point
Output to fault warning routing equipment
Disablement of each addressable point
Test condition
UNCONTROLLED DOCUMENT
NOTE: Due to AMPAC’s commitment to continuous improvement specifications may change without notice.
To Previous Page
Loading...
Need help?
General
