SECTION 7 STORAGE AND TRANSPORTATION
7-3
SECTION 7
STORAGE AND TRANSPORTATION
Cleaning Cabinet
Always turn the spectrum analyzer POWER switch OFF and disconnect the power plug from the AC power
inlet before cleaning the cabinet. To clean the external cabinet:
• Use a soft, dry cloth for wiping off.
• Use a cloth moistened with diluted neutral cleaning liquid if the instrument is very dirty or before long-term
storage.
After insuring that the cabinet has been thoroughly dried, use a soft, dry cloth for wiping off.
• If loose screws are found, tighten them with the appropriate tools.
CAUTION
Never use benzene, thinner, or alcohol to clean the external cabinet; it may damage the coat-
ing, or cause deformation or discoloration.
To Next Page
Loading...
