S3xxE MM PN: 10580-00253 Rev. J 1-1
Chapter 1 — General Information
1-1 Introduction
This manual provides maintenance instructions for Anritsu Site Master Models S331E, S332E, S361E and
S362E. The manual includes:
• General information in this chapter, including:
• Lists of necessary test equipment to perform verification testing
(Table 1-1, Table 1-2, and Table 1-3)
• Replaceable parts list (Table 1-4)
• Performance verification procedures:
• Chapter 2, “Spectrum Analyzer Verification”
• Chapter 3, “Cable and Antenna Analyzer Verification”
• Chapter 4, “Option Verification”
• Battery pack information (Chapter 5, “Battery Information”)
• Parts replacement procedures (Chapter 6, “Assembly Replacement”)
• Blank test records are included in Appendix A.
• Copy the blank test records from Appendix A and use them to record measured values. These test
records form a record of the performance of the instrument. Anritsu recommends that you make a
copy of the blank test records to document the measurements each time a Performance
Verification is performed. Continuing to document this process each time it is performed provides
a detailed history of instrument’s performance, allowing trends to be observed.
Familiarity with the basic operation of the front panel keys (for example, how to change measurement mode,
preset the unit, or the meaning of soft key or submenu) is assumed.
1-2 Anritsu Customer Service Centers
For the latest service and sales information in your area, please visit the following URL:
http://www.anritsu.com/Contact.asp
Choose a country for regional contact information.
Caution Before making any measurement, verify that all equipment has warmed up for at least 30 minutes.
To Next Page
Loading...
Need help?
General
