Anyload OCS Series - 8 Messages Illustration

31 | ANYLOAD OCS Series Electronic Crane Scale User’s Guide
8. Message Illustrations
Display
Stands for
Message
POWER‐ON
Battery charge left
Weighing detection
hold
The display is locked.
unstable
The scale is in motion/unstable.
The weight reading is too big or out of range.
The weight reading is too small or out of
range.
2nd
2ND MODE, waiting for key combination.
overload
The scale overloads.
password
PASSWORD MODE
error
The password is incorrect.
power off
POWER‐OFF
accumulated
The weight reading is accumulated.
invalid
The weight reading is invalid to be totalled.
no
accumulation
There is no total.
deleted
The last total is deleted.
no deletion
There is no total so the last total cannot be
deleted.
clear
The total is cleared.
unit kg
Unit is set to kg (metric system).
unit lb
Unit is set to lb (imperial system).
tare
The scale is tared (in net mode).
The resolution is 5 kg or lb.
system setup
SYSTEM SETUP welcome message
auto power off
AUTO POWER‐OFF TIMING
idle
IDLE TIMING
brightness
DISPLAY BRIGHTNESS
display
DISPLAY FREQUENCY