4 | ANYLOAD OCS Series Electronic Crane Scale User’s Guide
1. Safety Guides
For good performance and precise measurement on daily operation, observe
the following safety guides and maintenance recommendations:
o Do NOT overload the scale. This may damage the load cell and will void
the warranty.
o Do NOT leave the load hanged on the scale for too long. This will
decrease scale’s accuracy and shorten the load cell’s life span.
o Inspect the shackle and hook before using. Check clips, pins and screws
properly fitted and installed.
o Check battery frequently. When scale drained its battery, charge the
battery with its dedicated charger or replace it with a new one
o Avoid rotating the scale, this may damage the load cell
o Do NOT use scale under thunder or rain.
o Hang the scale on shelf or in dry and well‐ventilated room. Do NOT put
the scale on the ground directly.
o Do NOT attempt to repair the scale by yourself. Contact your local
dealer or to the Technical Support.
2. Features
This scale is a combination of sound and proven mechanical design, with
nowadays’ most advanced electronics to provide a superb feature sets. It is
versatile, reliable, accurate and easy to operate.
o Superb Quality. Strictly in accordance with OIML R76, Chinese
GB/T11883‐2002 National Standards, and European CE directives.
o Great Safety. Aluminum‐casting case, high firm hook and ring,
dedicated weighing load cell for safety installation.
o Strong Reliability. Cutting‐edge technology, quality integrated circuit
for high performance and long time stability.
o Broad Applicability. Popular and applicable in storage, textile,
metallurgy industry, and so forth.
o Easy to Use. Ultra‐red remote controlling design. Easy to operate on
the scale or in distance.
o Complete Function. Division switch, unit conversion, automatic power
saver, battery inspection, idle mode, tare set, etc.
To Next Page
Loading...
