3
Apex Instruments, Inc.
Disclaimer
Retaining Instructions
Apex Instruments Inc. makes no representations or warranties with respect to this manual and, to the maximum extent
permitted by law, expressly limits its liabilities for breach of any warranty that may be implied to the replacement of this
manual with another. Furthermore, Apex Instruments reserves the right to revise this publication at any time without
incurring an obligation to notify any person of the revision.
The information provided in this document contains general descriptions and or technical characteristics of the
performance of the products contained herein. This document is not intended as a substitute for and is not to be used for
determining suitability or reliability of these products for specific user applications. The user or integrator is responsible for
performing the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant
specific application or use thereof. Neither Apex Instruments nor any of its affiliates or subsidiaries shall be responsible or
liable for misuse of the information that is contained herein. If you have any suggestions for improvements or amendments
or have found errors in this publication, please notify us.
All pertinent state, regional and local safety regulations must be observed when installing and using this product. For
reasons of safety and to help ensure compliance with documented system data, only the manufacturer shall perform
repairs to components.
Failure to observe this information can result in injury or equipment damage.
Copyright © 2023 by Apex Instruments, Inc.
All rights reserved. No part of this publication may be reproduced, distributed or transmitted in any form or by any means,
including photocopying, recording or other electronic or mechanical methods, without the prior written permission of the
publisher.
Read and understand this manual and its safety instructions before using this product. Failure to do so can result in
serious injury or improper execution of sampling procedures.
Follow all relevant instructions to avoid fire, explosions, electric shocks or other hazards that may result in damage to
property and/or severe or fatal injuries.
The product shall only be used by persons who have fully read and understood the contents of this user manual.
Ensure that each person who uses the product has read these warnings and instructions and follows them.
Keep all safety information and instructions for future reference and pass them on to subsequent users of the product.
The manufacturer is not liable for cases of material damage or personal injury caused by incorrect handling or non-
compliance with the safety instructions. In such cases, the warranty will be voided.
XD-502 Digital Console
To Next Page
Loading...
