APV 5.2 User Manual

35
Quality for Professionals
专业质量
您将在此处找到“调整校准值”的视频教程：
www.apv.at Service Videos User Guide
www.apv.at 服务 视频资料 用户指南
The impulses/100 m may be manually set here.
可在此处手动设置每 100 米的脉冲次数。
TIP: Once the device has been calibrated, note the value and readjust the setting here as
necessary.
提示
：一旦装置校准完成，注意数值并在必要时再次调整设置。
3.3.2.4 Resetting the calibration
3.3.2.4
重置校准
Confirm with the button.
通过按钮进行确认。
Resets the value to the factory setting.
将数值恢复至出厂设置。
This is displayed after resetting of the calibration.
该结果将在重置校准后显示。
3.4 Operation with hoisting system sensor
3.4
利用提升系统传感器的操作
The sowing shaft of the PS can automatically turn on and stop via a hoisting system sensor when lifting
and lowering the implement. This enables you save the effort of manually switching the sowing shaft
on/off on headlands.
当提升或降低工具时，PS 的播种轴可通过提升系统传感器自动启闭。这能够帮您避免在田边没犁到的地

APV 5.2 Specifications

General

Brand	APV
Model	5.2
Category	Control Unit
Language	English