40
Quality for Professionals
专业质量
您可以在编程菜单中以已经选中的语言为基础，根据需要进行设置。
3.10 Fan settings
3.10
风机设置
This menu item is used to set the fan speed and the fan capacity. This can be helpful if fine (light) seeds
(e.g.: micro-granulate, rape, etc.) are being processed or if air separators are equipped. In addition, the
fan's power consumption may be reduced if the entire fan capacity is not needed for the work.
利用该菜单项设置风机速度和风机容量。如果正在处理粒径小（轻）的种子（例如小颗粒、油菜籽等）或
如果配备有空气分离器，这会起作用。此外，如果作业并不需要整个风机容量，则可以减少风机的耗电量。
3.11 Measuring units
3.11
计量单位
Note: This menu item can be called up via the programming menu or with the initial
commissioning. See under point 2.3.2 and/or 6.13.
注意：可以通过编程菜单或在初始调试时，调出该菜单项。参见第 2.3.2 点和/或第 6.13 点。
From software version V1.23 and up, measuring units for length, area, and
weight may be switched between metric units (m, ha, kg, km/h) and imperial
measuring units (ft, ac, lb, mph).
对于第 1.23 版或版本更高的软件，长度、面积和重量的计量单位可在公制单位
（米、公顷、千克、千米/时）与英制单位（英尺、英亩、磅、英里/时）之间转
换。
To Next Page
Loading...
Need help?
General