22
Quality for Professionals
专业质量
3.1.1
以千克
/
公顷为单位进行校准
Here you will find the tutorial, "Calibrating according to kg/ha" per video:
您将在此处找到“以千克/公顷为单位进行校准”的每个视频的教程：
www.apv.at Service Videos User Guide
www.apv.at 服务 视频资料 用户指南
If you have selected "Calibrating by kg/ha" in the settings menu, the following points will appear in the
calibration menu:
如果您已经在设置菜单中选定“以千克/公顷为单位进行校准”，校准菜单将显示下述点：
The working width must be input here.
必须在此处输入作业宽度。
(note overlapping!)
（注意重叠！）
Input the driving speed here.
在此处输入行车速度。
Input the desired output volume here.
在此处输入需要的输出量。
(e.g.103.5 kg/ha)
（例如，103.5 千克/公顷）
Set the duration for the seed rate calibration test here. If a calibration button
is installed and “Calibration button present?” has been set to YES in the
programming menu, this item will not appear.
在此处设置播种量校准试验的持续时间。如果安装了校准按钮，并在编程菜单
中将“是否存在校准按钮”设置为是，则该菜单项将不会出现。
To Next Page
Loading...
Need help?
General