49
Quality for Professionals
专业质量
校准：
参见第 6.3 项
Cable length:
电缆长度：
5m
5 米
Scope of delivery:
输送范围：
1 ground wheel, 1 ground wheel installation forming tube, and 1 ground
wheel mounting plate
1 个行走轮，1 个行走轮安装成型管、1 个行走轮安装板
A sensor mounted on the ground wheel measures the driving speed [km/h]. This is displayed on the
control module and the seed volume is automatically regulated by the sowing shaft speed control. This
means that the required volume of seed per hectare is always maintained, even if the driven speed
deviates slightly from the speed specified in the calibration test. All processes such as control and
checking are provided to the user during the work process by the control module. Even when making
turns, you do not need to manually operate the control module. This is automatically detected by the
ground wheel when lifting or lowering the tillage implement
通过安装在行走轮上的传感器测量行车速度【千米/小时】。这在控制模块上显示，且播种轴转速控制器会
自动调节播种量。这意味着，即使驱动速度与校准试验规定的速度略有不同，仍可以始终维持每公顷所需
要的种子量。作业过程中，控制模块将向用户提供诸如控制、检查等所有的操作项目。即使在拖拉机转弯
时，您也无需手动操作控制模块。当提升或降低耕作机具时，这能够由行走轮自动探测到。
Note: The ground wheel's scope of delivery also includes an installation kit (see figure above)
that allows it to be easily fit to a range of tillage implements.
注意
：行走轮的输送范围还包括能够实现其与众多耕作机具轻易搭配的装配工具（见上图）。
5.2 7-pin signal cable(item no.: 00410-2-006)
5.2 7
插孔信号电缆（项目编号：
00410-2-006
）
To Next Page
Loading...
Need help?
General