25
Quality for Professionals
专业质量
now displayed
现在所显示的是设置的千克/
公顷数值
appears if you are working with
a speed sensor.
如果您在作业过程中使用速度传
感器，则将出现两列显示。
TIP: The test will continue if your PS is equipped with a level sensor and if the “Container
almost empty” message appears on the display. However, insufficient seed in the container
can distort the precision of the seed rate calibration test.
提示：
如果您的 PS 配备有料位显示器，或显示器显示“容器几乎为空”的消息，则试验将继续。
但是，容器中不足的种子量会削弱播种量校准试验的精确度。
This menu item is used to approximately preset the speed of the sowing
shaft. The speed (%) of the sowing shaft does not need to be changed,
because the settings from the calibration test are automatically applied.
使用该菜单项预设近似的播种轴转速。无需改变播种轴的转速（%），因为
设备会自动应用校准试验的设置参数。
3.1.2 Calibrating according to seeds/m2
3.1.2
以种子量
/
平方米为单位进行校准
Here you will find the tutorial "Calibrating according to seeds//m
2
":
您将在此处找到“以种子量/平方米为单位进行校准”的教程：
www.apv.at Service Videos User Guide
www.apv.at 服务 视频资料 用户指南
Calculation of the application rate:
施用量计算：
Quantity of seed (kg/ha)=
TSW (g) xgrains/m
2
x 100
To Next Page
Loading...
Need help?
General