24
Quality for Professionals
专业质量
试验开始后，播种轮即开始自动旋转，而无需风扇电动机提供动力。一旦到
达设定的时间，播种轴即自动停止旋转。如果存在校准开关，则系统将等待，
直到激活该开关。
To be able to spread the desired output volume, we recommend repeating the seed rate calibration test
until the Test not precise! Repeat? "message no longer appears. If "Drill shaft RPM too high" appears on
the display, the sowing shaft cannot turn fast enough. If "Drill shaft RPM too low" appears on the display,
the sowing shaft cannot turn slowly enough (see also 4.1). With the button, the user is returned to
the previously displayed value. The "tick symbol" and the output volume in kg/ha only appear on the
main display if the automatic re-adjustment of the sowing shaft is below 3% (difference).
为了能够持续需要的输出量，我们建议，重复播种量校准试验直到“试验不精确！是否重复？”消息不再出
现。如果显示器显示“排种机轴的转速太高”，则播种轴的转速不够快。如果显示器显示“排种机轴的转速太
低”，则播种轴的转速不够慢（参见 4.1）。通过 按钮，用户可返回至之前显示的数值。如果播种轴的
自动再调整低于 3%（差异），则主显示器仅显示“勾选符号”和输出量（单位：千克/公顷）。
TIP: The test will continue if your PS is equipped with a level sensor and if the "Container almost empty"
message appears on the display. However, insufficient ^ seed in the container can distort the precision of
the seed rate calibration test.
提示：如果您的 PS 配备有料位传感器，或显示器显示“容器几乎为空”的消息，则试验将继续。但是，容
器中不足的种子量会削弱播种量校准试验的精确性。
The sowing shaft speed now automatically calculates correctly. The display
then returns to the main menu.
现在，可自动精确计算播种轴的转速。之后，显示器返回至主菜单。
The set kg/ha values are The two-column display
To Next Page
Loading...
Need help?
General