59
Quality for Professionals
专业质量
Installation
location:
安装位置：
Because most tillage implements are raised
and lowered when being used, it is best to
install the sensor on the tillage implement's
three point. The sensor can also be installed
elsewhere where there is mechanical
movement. For coupled tillage implements,
the sensor can be installed on the chassis,
because the hoist is not being used here. The
programming (for the position in which work is
to be carried out) can be adjusted for this.
由于大多数耕作农具在使用时需要上下来回操
作，最好在耕作农具的三点上安装传感器。传感
器也可以安装在其他存在机械运动的位置。对于
耦合的耕作农具，因为此处并未使用卷扬机，所
以可将传感器安装在底盘上。针对此，可调整程
序设计（即将开始作业的位置）。
This is explained in item 6.8
第 6.8 项中对此进行了解释。
Fig.: 15
图：15
Scope of delivery:
输送范围：
1 sensor
1 个传感器
1 fastening plate incl. screws/bolts
1 个固定板，包括螺钉/螺栓
To Next Page
Loading...
Need help?
General