ARB LINX LX100 User Manual

| LX100 VEHICLE ACCESSORY INTERFACE KIT OPERATION GUIDE
PAGE 14
0 5.
GETTING
STARTED
The LINX Display receives power from the LINX Controller via the
USB charge cable provided.
The LINX Display’s on-board battery will take around 1 hour to fully charge from
at condition and provide approximately 4 hours of non-connected run time. It
is normal practice to leave the display on all the time and connected when in
the vehicle. When outside the vehicle, the display communicates with the LINX
Controller via a Bluetooth connection up to 10m away.
USB CABLE
04
LINX CONTROLLER
LINX DISPLAY
GIMBAL MOUNT
LINX DISPLAY
03
CLIP ON COVER
05
02
01
POWER BUTTON
06
VOLUME
07

ARB LINX LX100 Specifications

General

Brand	ARB
Model	LINX LX100
Category	Automobile Accessories
Language	English