HOME
SCREEN
Upon start-up, the LINX Display shows the ARB LINX home screen
and then enters 'split screen mode'.
The status bar contains several icons positioned across the top of the display
which indicate the status of the unit. Items which are active/on are bright. Items
which are inactive/off are greyed out.
Settings that should remain on all the time include GPS (for the LINX
Speedometer module to operate), Bluetooth (for LINX Controller communications
when the LINX Display is disconnected from the USB cable) and WiFi as this is
used by the LINX Display to communicate with the Internet during LINX updates.
GPS
01
(on)
BLUETOOTH
02
(on)
WIFI
03
(on)
SD CARD
(none)
04
BATTERY
(full)
05
TIME
06
To Next Page
Loading...
Need help?
General
