PAGE 18
BLUETOOTH PAIRING THE DISPLAY WITH CONTROLLER
AUTO PAIRING
The easiest way to pair the display and controller is to rst connect them via USB
and perform a software update as described in the section above. Then simply
unplug the USB cable and when the LINX Display will request permission to pair, as
shown below.
The LINX Display and LINX Controller can communicate using either the USB or
Bluetooth connection. But before Bluetooth communication can be used, rst they
have to be paired.
Tap PAIR to accept the pairing. The LINX Display and LINX
Controller are now paired and will connect via Bluetooth whenever
in range.
MANUAL PAIRING
If the LINX system installation is already complete and USB cable hasn’t been used
to connect the LINX Display and LINX Controller, and the LINX Controller is difcult
to access, then the display and controller can be manually paired via the Bluetooth
settings.
Note: Once the LINX Display and LINX Controller have been Bluetooth paired,
the LINX Controller will become invisible to all other Bluetooth devices. The LINX
Controller Bluetooth visibility can only be reset by resetting the LINX Controller, by
disconnecting/reconnecting it to power.
To Next Page
Loading...
Need help?
General
