ARB LINX LX100 User Manual

| LX100 VEHICLE ACCESSORY INTERFACE KIT OPERATION GUIDE
PAGE 29
LINX SETTINGS SCREEN
UNITS
03
THEME COLOUR
04
LINX UPDATE
05
The LINX system’s Auto Night Mode integrates with the vehicles headlights and enables the user to customise the display
brightness for specic driving conditions. The Units for speed, distance, temperature and pressure can also be set
individually. The interface Theme Colour may be adjusted and a LINX Update will update the LINX software to ensure the
system is running the latest version of LINX (Note: Run a LINX Update when rst installed).
NOTES
• The Vehicle Input Status area
01
will show a coloured dot next to activated input connections on the controller.
• Use the slide control on Auto Night Mode
02
to customise the brightness level of the LINX Display for a specic
driving condition. E.g. For night driving you may want to switch your low beam lights on, then adjust the brightness
down to a level you want active when the low beam lights are next in operation.
• Tap Units
03
to bring up the units menu and tap the combination of units required.
• Tap Theme Colour
04
. Press and drag or slide to match your vehicle’s instrumentation colours.
• Run a LINX Update
05
to check if you have the latest software build and features on your device.
• Tap the Console button
06
to enter conguration commands.
• Tap Calibrate Vehicle
07
then follow the instructions to calibrate the controllers orientation within the vehicle.
AUTO NIGHT MODE
02
INDICATES IF INPUT IS ON/OFF01
UNITS SELECTION SCREEEN
THEME COLOUR SCREEN
CONSOLE
06
CALIBRATE VEHICLE
07

ARB LINX LX100 Specifications

General

Brand	ARB
Model	LINX LX100
Category	Automobile Accessories
Language	English