COMPRESSOR
MODULE
The LINX Compressor module is used to congure and operate your
air compressor. 'Pressure Control' is an optional upgrade that is
used in conjunction with the LINX Pressure Control Kit (7450107) to
inate or deate your tyres to a target pressure.
SWITCHING ON COMPRESSOR
To switch the Compressor on, tap the button once. Tap again to switch it off.
Note: Vehicle accessory power must be on before Compressor can be turned on.
1. Single tap on Compressor button.
2. Compressor highlighted indicates it is on.
AND OPTIONAL PRESSURE CONTROL MODULE
The blue automation triangle appears in the top right corner of the Compressor button to indicate that LINX has
changed the state of the Compressor, such as the vehicles accessory power turning off, or Front Traction turning on.
To Next Page
Loading...
Need help?
General
