PAGE 49
SET OPERATIONAL CONTROL STATE
To set the front and/or rear airbags hardware conguration:
1. Single tap on Joined or Split.
SET MINIMUM AND MAXIMUM AIRBAG OPERATING PRESSURES
1. Press & hold on the underlined values.
There are three options that can be set for the Front and/or Rear airbags as
follows:
None will leave the Air Suspension inactive.
Joined will control them as pairs (e.g. to level the vehicle from Front to Rear).
Split will control each side of the vehicle independently of the other to compen-
sate for uneven vehicle loads.
The range of control options will be dependent on the hardware and LINX acces-
sories you have congured on your vehicle.
To Next Page
Loading...
Need help?
General
