Arbiter Systems 1040C User Manual

List of Tables
Table 2.1 - PMC Output Functions and Display Quantities 5
Table 2.2 - Power Factor/Phase Operating Procedure 10
Table 2.2 - Power Factor/Phase Operating Procedure (continued) 11
Table 2.2 - Power Factor\Phase Operating Procedure (continued) 12
Table 2.3 - HHU Status Messages 21
Table 2.4 - GPIB Command Description 25
Table 2.4 - GPIB Command Description (continued) 26
Table 2.5 - 1040C Status Message Description, Control Status (QC) 27
Table 2.5 - Control Status (QC) (continued) 28
Table 2.6 - 1040C Status Message Description, Current & Voltage 29
Table 2.7 - GPIB Error Codes 30
Table 2.8 - Routine Operation Error Codes 31
Table 2.9 - Diagnostic Tests and Error Codes 32
Table 2.9 - Diagnostic Test Error Codes (continued) 33
Table 2.10 - Error/Probable Cause/Appropriate Action 45
Table 2.10 - Error/Probable Cause/Appropriate Action (continued) 47
Table 2.10 - Error/Probable Cause/Appropriate Action (continued) 49
List of Figures
Figure 2.1 – OPERATING SEQUENCE 3
Figure 2.2 – PMC CONNECTIONS FOR TESTING POWER FACTOR/PHASE OPERATION 9
Figure 2.3 – PMC CONNECTIONS FOR TESTING DC VOLTAGE OPERATION 13
Figure 2.4 – PMC CONNECTIONS FOR TESTING AC VOLTAGE OPERATION 14
Figure 2.5 – PMC CONNECTIONS FOR TESTING DC CURRENT OPERATION 15
Figure 2.6 – PMC COMNNECTIONS FOR TESTING AC CURRENT OPERATION 16
Figure 2.7 – PMC CONNECTIONS FOR TESTING AC POWER OPERATION 17
Figure 2.8 – PMC CONNECTIONS FOR TESTING SYNCHROSCOPE OPERATION 18
Figure 2.9 – PMC CONNECTIONS FOR TESTING FREQUENCY OPERATION 19

Arbiter Systems 1040C Specifications

General

Brand	Arbiter Systems
Model	1040C
Category	Test Equipment
Language	English