arcelik A75 D 895 A - Page 97

97
ENGLISH
DETAILED CHANNEL SETTINGS
----------------------------------------------------
21 After completing the settings for the 4 satel-
lites separately, select the »Next« item with
»
V « or » Λ « from the »Automatic Channel
Search« menu and confirm with »

«.
– »Automatic Scan« menu shall be dis-
played and the scan for TV stations will
start.
– Scanning may take several minutes
depending on the number of television
stations received.
22 Press »
a
« to return to the previous menu,
press »
H
« to return to TV broadcast or
press »
T
« to return to Home menu.
Antenna settings for digital sat-
ellite channels and searching for
channels automatically with SCR
system
Notes:
7
Your TV supports SCR system. SCR (Single
Channel Router - EN 50494).
7
LNB settings described in the following
section require significant expertise on
satellite systems. Contact an expert about
the subject.
1 Press »
H
« to return to the TV mode.
2 Select »Source« with »
)
« and confirm with
»

«.
3 Select »satellite« and confirm with »

«.
4 Press »
)
« and select »Settings« with »
>
«
and confirm with »

« .
5 Confirm »Channels and Inputs« with »

«.
6 Select »Channels« and confirm with »

«.
– Channel menu shall be displayed.
7 Confirm »Satellite« with »

«.
8 Confirm »Channel Installation Mode« with
»

«.
9 Select »Satellite (Standard)« with »
V « or
»
Λ « or if you are using an operator, select
»Satellite (Operator Mode)« and confirm
with »

«.
10 Press »
a
« to return to the previous menu.
11 Use »
V « or » Λ « to select »Channels« and
confirm with »

« button.
12 Use »
V « or » Λ « to select »Automatic
Channel Scan« and confirm with »

«.
– Automatic Channel Scan menu shall be
displayed.
13 Select »Other« with »
V « or » Λ « and press
»

« to confirm.