74
Part 1: Choose your Device and Brand
Select the type of device that you want to control with the
IR Emitter.
Select the brand of your device.
Highlight the Tune IR Emitter button, press OK.
The TV Channels button allows you to give names to each
channel. For example, if channel 6 is CNN where you live, then
you can give channel 6 that name in this screen. Or, if you
use the My Yahoo!
®
personal calendar to set your recording
scheduler, the ARCHOS
™
device will allow you to assign a
channel number to a station name given from your scheduled
TV programs.
Part 2: Finding the Right Emitter Codes
This screen allows you to correctly set the codes and
parameters to allow the Infrared emitter to correctly control
your tuner (VCR, cable box, or satellite receiver).
Tune device code (one code available): Some
manufacturers use only one code for all of their products.
The code does not change from one model to another or
from one year to another. In this case, there will only be
one single code available. You can now test the channel
select.
Tune device code (multiple codes available): Some makers
of video equipment don’t use the same set of control
codes for all of their products. They have various code
sets for various models and various years. You will have
to try each of the codes to nd out which code works with
your device. In the example screen, you see the code V009.
If this code does not work when doing the Test: channel
select, advance it to the next code and then test to see if
that next code works.
1.
2.
3.
•
1.
2.
To Next Page
Loading...
