Areca ARC-1200 - 3.2 McBIOS RAID manager

BIOS CONFIGURATION
25
Areca Technology Corporation RAID Controller Setup V1.5, 2007/04/14
ArrowKey Or AZ:Move Cursor, Enter: Select, ** Select & Press F10(Tab) to Reboot**
Select An Adapter To Congure
( 005/0/ 0)I/O=FD700000h, IRQ = 11
Use the Up and Down arrow keys to select the adapter you want
to congure. While the desired adapter is highlighted, press the
Enter key to enter the main menu of the McBIOS RAID manager.
3.2 McBIOS RAID manager
The rmware-based McBIOS RAID manager is used to congure
RAID sets and volume sets. Because the utility resides in the SATA
RAID controller rmware, operation is independent of any operat-
ing systems on your computer. This utility can be used to:
• Create RAID sets,
• Expand RAID sets,
I/O Port Addr:FD700000h, F2 (Tab): Select Controller, F10: Reset System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
View System Events
Clear Event Buffer
Hardware Monitor
System information
Quick Volume/Raid Setup
Verify Password
Note:
The manufacture
default password is
set to 0000; this
password can be
modied by selecting
Change Password
in the Raid System
Function section.