Areca ARC-1200 - For Freebsd; For Solaris 10 X86

61
ARCHTTP PROXY SERVER INSTALLATION
For Mozilla user:
Because our management need Java support, so user may
need upgrade to version 1.6 or later.
5.3 For FreeBSD
You should have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID
hardware and FreeBSD are installed and operational in your
system.
The following details FreeBSD installation procedure of the SATA
RAID controller software.
1. Insert the RAID controller software CD in the CD-ROM drive.
2. Copy <CD-ROM>\PACKAGES\FreeBSD\http directory to local
The next following step is same with Linux. Please see section 5.2
For Linux.
5.4 For Solaris 10 x86
You must have administrative level permissions to install SATA
RAID software. This procedure assumes that the SATA RAID hard-
ware and FreeBSD are installed and operational in your system.
The following details Solaris installation procedure of the SATA
RAID controller software.
1. Insert the RAID controller software CD in the CD-ROM drive.
2. Copy <CD-ROM>\PACKAGES\Solaris\http directory to local The
next following step is same with Linux. Please see section 5.2 For
Linux.
Controller [1] Http: New client [9] accepted
Controller [1] Http: New Recv 243 bytes
Controller [1] Http: Send [174] bytes back to the client
(3). If you need the “Cfg Assistant”, please refer to section 5.6
ArcHttp Conguration.
3. See the next chapter detailing the McRAID Storage Manager to
customize your RAID volume set.