Areca ARC-1200 - Raid System Function; Mute the Alert Beeper; Alert Beeper Setting; Change Password

BIOS CONFIGURATION
42
I/O Port Addr:FD700000h, F2 (Tab): Select Controller, F10: Reset System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
View System Events
Clear Event Buffer
Hardware Monitor
System information
Raid System Function
Raid System Function
Alert Beeper Setting
Change Password
JBOD/RAID Function
Background Task Priority
Maximum SATA Mode
HDD Read Ahead Cache
Stagger Power on
Spin Down Idle HDD
HDD SMART Status Polling
Auto Activate Raid Set
Capacity Truncation
Mute The Alert Beeper
3.6.5.1 Mute The Alert Beeper
The “Mute The Alert Beeper” function is used to control the SATA
RAID controller alert beeper. Select Yes option and press the En-
ter key in the dialog box to turn the alert beeper off temporarily.
The alert beeper will still activate on the next event.
3.6.5.2 Alert Beeper Setting
The “Alert Beeper Setting” item is used to “Disabled” or “En-
abled” the SATA RAID controller alarm tone generator. Select
“Disabled” and press the Enter key in the dialog box to turn the
beeper off.
3.6.5.3 Change Password
The manufacture default password is set to 0000. The password
option allows user to set or clear the password protection fea-
ture. Once the password has been set, the user can monitor and
congure the controller only by providing the correct password.
3.6.5 Raid System Function
To set the RAID system function, move the cursor bar to the main
menu and select the “Raid System Function” item and then press
Enter key. The “Raid System Function” menu will show multiple
items. Move the cursor bar to an item, then press Enter key to
select the desired function.