DRIVER INSTALLATION
56
1. Insert the Areca Mac driver & software CD that came with
your Areca SATA RAID Adapter.
2. Double-click on the following le that resides at <CD-ROM>\
packages\MacOS to add the installer on the Finder.
a. install_mraid_mac.zip (For Power Mac G5)
b. install_mraid_macpro.zip (For Mac Pro)
3. Launch the installer by double-clicking the install_mraid_mac or
install_mraid_macpro on the Finder.
4. Follow the installer steps to install Areca driver, archttp64 and
arc_cli utility at the same time.
5. Reboot your Power Mac G5 or Mac Pro system
Normally archttp64 and arc_cli are installed at the same time you
install the driver for your Areca SATA RAID adapter. Once archttp64
and arc_cli have been installed, the background task automati-
cally starts each time you start your computer. There is one MARID
icon showing on your desktop. This icon is for you to start up the
McRAID storage manager (by archttp64) and arc_cli utility.
Please refer to the “Mac_manual“ le on the software CD <CD-
ROM>\DOCS directory.
4.7 Driver Installation for UnixWare 7.1.4
Please refer to the “readme.txt” le on the software suite CD or a
manual from website: http://www.areca.com.tw
4.8 Driver Installation for NetWare 6.5
Please refer to the “readme.txt” le on the software suite
CD or a manual from website: http://www.areca.com.tw
To Next Page
Loading...
