WEB BROWSER-BASED CONFIGURATION
82
the same capacity for both of these drives so that one could
replace the other.
Multiples Of 1G: If you have 123 GB drives from different ven-
dors; chances are that the capacity varies slightly. For example,
one drive might be 123.5 GB, and the other 123.4 GB. The
“Multiples Of 1G” truncates the fractional parts. This makes the
same capacity for both of these drives so that one could replace
the other.
Disabled: It does not truncate the capacity.
6.8.2 View Events/Mute Beeper
To view the SATA RAID controller’s information, click on the “Sys-
tem Information” link. The SATA RAID controller ‘System Events
Information” screen appears.
Choose this option to view the system events information: Time,
Device, Event Type, Elapse Time and Errors. The RAID system
does not have a built-in real time clock. The time information is
the relative time from the SATA RAID controller while it powered
on.
6.8.3 Generate Test Event
Use this feature is to generate events for testing purposes.
6.8.4 Clear Events Buffer
Use this feature to clear the entire events buffer information.
6.8.5 Modify Password
To set or change the SATA RAID controller password, select “Raid
System Function” from the menu and click on the “Change Pass-
word” link. The Modify System Password screen appears.
The manufacture default password is set to 0000. The pass-
word option allows user to set or clear the SATA RAID controller’s
password protection feature. Once the password has been set,
To Next Page
Loading...
