Areca ARC-1200 - Modify Volume Set; Volume Growth

BIOS CONFIGURATION
39
ter key to show all volume sets within that RAID set. Move the
cursor to the volume set number that is to be deleted and press
Enter to delete it.
3.6.3.3 Modify Volume Set
Use this option to modify volume set attributes. To modify vol-
ume set attributes from RAID set system function, move the
cursor bar to the “Modify Volume Set” item, then press the Enter
key. The “Modify Volume Set” menu will show all RAID set items.
Move the cursor bar to a desired RAID set number item, then
press the Enter key to show all volume set items. Select the
desired volume set from the list to be changed, press the Enter
key to modify it.
As shown, “Volume Modication” shows the volume set attri-
butes that user can modify it. But user can only modify the last
volume set capacity.
• Volume Growth
Use the “Expand Raid Set’ function to add a disk to the RAID
set. The additional capacity can be used to enlarge the volume
set size or to create another volume set. The “Modify Volume
Set” function can support the “Volume Modication” function.
To expand the last volume set capacity , move the cursor bar to
the “ Capacity” item and entry the capacity size. When nished
the above action,press the ESC key and select the Yes option
to complete the action. The last volume set starts to expand its
capacity.
To Expand an existing volume noticed:
• Only the last volume can expand capacity.
• When expand volume capacity, you can’t modify stripe size or
modify RAID revel simultaneously.
• You can expand volume capacity, but can’t reduce volume
capacity size.
• After volume expansion, the volume capacity can't be
decreased.