Areca ARC-1200 - Volume Set Migration; Physical Drive

77
WEB BROWSER-BASED CONFIGURATION
Set” function can support the modication of the last volume
capacity attribute. To expand the last volume set capacity
, move the cursor bar to the “ Capacity” item and entry
the capacity size. When nished the above action, click the
“Conrm The Operation” check box and then click the “Submit”
button to enlarge the last volume set. The last volume set
starts to expand its capacity
To expand an existing volume noticed:
• Only the last volume can expand capacity.
• When expand volume capacity, you can not modify stripe size
or modify raid revel simultaneously.
• You can expand volume capacity, but can not reduce volume
capacity size.
• After volume expansion, the volume capacity can not be
decreased.
For greater 2TB expansion:
• If your system installed in the volume, do not expand the
volume capacity greater 2TB, currently OS can not support
boot up from a greater 2TB capacity device.
• Expand over 2TB used 64-bit LBA mode. Please make sure
your OS supports 64-bit LBA before expand it.
6.6.3.2 Volume Set Migration
Migrating occurs when a volume set is migrating from one RAID
level to another, a volume set strip size changes, or when a
disk is added to a raid set. Migration status is displayed in the
volume state area of the “Raid Set Hierarchy” screen.
6.7 Physical Drive
Choose this option to select a physical disk from the main menu
and then perform the operations listed below.