Areca ARC-1200 - 6.5 Raid Set Functions

WEB BROWSER-BASED CONFIGURATION
70
Note:
In “Quick Create”, your volume set is automatically congured
based on the number of disks in your system. Use the “Raid
Set Functions” and “Volume Set Functions” if you prefer to
customize your system.
The number of physical drives in the SATA RAID controller deter-
mines the RAID levels that can be implemented with the RAID set.
You can create a RAID set associated with exactly one volume set.
The user can change the RAID level, stripe size, and capacity. A hot
spare option is also created depending upon the existing congura-
tion.
Click the “Conrm The Operation” check box and click on the “Sub-
mit” button in the “Quick Create” screen, the RAID set and volume
set will start to initialize.
Note:
If volume capacity exceeds 2TB, controller will show the
"Greater Two TB Volume Support" sub-menu. Greater Than
Two TB Volume Choose 64bit LBA option.
For more details please download PDF le from ftp://ftp.
areca.com.tw/RaidCards/Documents/Manual_Spec/
Over2TB_050721.zip
6.5 Raid Set Functions
Use the “Raid Set Function” and “Volume Set Function” if you pre-
fer to customize your system. Manual conguration can provide
full control of the RAID set settings, but it will take longer to com-
plete than the “Quick Create” conguration. Select the “Raid Set
Functions” to manually congure the RAID set for the rst time or
delete and recongure existing RAID sets. (A RAID set is a group
of disks containing one or more volume sets.)