BIOS CONFIGURATION
37
7. The initialization percentage of volume set will be displayed at
the button line.
• Volume Name
The default volume name will always appear as Volume Set #.
You can rename the volume set providing it does not exceed
the 15 characters limit.
• Raid Level
Set the RAID level for the volume set. Highlight “Raid Level”
and press Enter key.
The available RAID levels for the current volume set are dis-
played. Select a RAID level and press the Enter key to conrm.
• Capacity
The maximum available volume size is the default value for the
rst setting. Enter the appropriate volume size to t your ap-
plication. The capacity value can be increased or decreased by
the UP and DOWN arrow keys. The capacity of each volume
set must be less than or equal to the total capacity of the RAID
set on which it resides.
If volume capacity will exceed 2TB, controller will show the
"Greater Two TB volume Support" sub-menu.
• No
It keeps the volume size with max. 2TB limitation.
• 64bit LBA
This option uses 16 bytes CDB instead of 10 bytes. The
maximum volume capacity up to 512TB.
This option works on different OS which supports 16 bytes CDB.
such as:
Windows 2003 with SP1
Linux kernel 2.6.x or latter
For more details please download PDF le from ftp://ftp.
areca.com.tw/RaidCards/Documents/Manual_Spec/
Over2TB_050721.zip
To Next Page
Loading...
